钢筋冷挤压机施工中有需求标准的问题,比方机械联接、焊接接头面积百分率应按受拉区不宜控制。如遇钢筋数量奇数时,百分率略超过些也是符合要求的。受压区则不限制。绑扎接头面积百分率控制:受拉钢筋梁、板、墙类不宜大。
There are some problems in the construction of steel bar cold extrusion machine, such as the area percentage of mechanical connection and welding joint should not be controlled according to the tensile zone. If the number of reinforcement is odd, the percentage slightly more than that is also in line with the requirements. The compression zone is not limited. Binding joint area percentage control: tensile steel beam, plate, wall class should not be large.
当工程中确有必要接头面积百分率时,梁受拉钢筋不应大于50%,其他构件可根据实际情况放宽。因而粱中受拉钢筋接头面积百分率是一个底线,不应跳过,其他构件则可以放宽,但满足搭接长度的要求。
如般柱子钢筋(特别是构造柱),也可设置一个搭接头,这将方便于施工。适用于承受拉、压双向作用力的各类构筑物钢筋混凝结构中的钢筋冷挤压机施工。节材、节能,不受钢筋成份及种类的限制。
可联接,可提早予制,工厂化作业,不占用工期施工。钢筋冷挤压机套筒接头形式多样,在力学性能上也是有差异的,根据力学性能按其承受能力分类,有利于考虑到结构的重要性、接头在结构中所在方位、接头百分率等。
不同的应用场合等方面影响合理选用接头类型。主要可以分为:接头联接器被联接到的拉伸强度不小于钢筋或标准值的1.10倍的拉伸强度和延展性的实际拉伸强度,并具有高的拉伸强度和紧缩性能的重复。http://www.zjgunsiji.com/